Section Contents:
Laser-Mate | Filter Wheels | T thread to M42 Adaptor Ring | Observer's 1.25" Filter Set | Observer's 2" Filter Set | The Bino-Mate | Reticule Eyepiece | Polarising star diagonal | Polarising Filters | Neutral Density Filters | Refractor Focusing Knobs | Red Dot Finder | Add-on Solar Finder | Eyepiece & Equipment Cases | Parfocalising Rings | Soft Eye-Shields | Observing Hood | Night Vision Torches | Bulkhead Eyepiece Shelf (for Dobbos and Obbos) | Flashing LED signal lights | Nite Saver Red Goggles | Observing Chair | Rubber eyecups | Anti-fringing filter | Glow-in-the-dark eyepiece labels

See specific telescope model sections for telescope aids such as Handset Holders, Eyepiece Trays etc.

ac666
Laser-Mate Universal Laser Pointer finder bracket
Designed for use with all green laser pointers

The AE Laser-Mate Universal Laser Pointer finder bracket allows you to turn any green laser pointer in to a superb telescope finder! Used responsibly, the laser finder is a great way to point telescopes - it’s great on GOTO scopes too - showing you exactly where the instrument is pointing, to show other observers or to transfer the target position to another non-GOTO scope etc. The Laser-Mate finder bracket attaches to the telescope using our universal mounting bracket that can be used on telescope tubes ranging in size from 80mm upwards to 450mm and beyond! The universal mounting (identical to the one used on our Universal Solar Finder AC618 and Easy-Aim red dot reflex finder AC544) uses double-sided foam adhesive strip for permanent fixing (removable!). The separate finder bracket (easily removed from the base by loosening the thumb screws) has six nylon thumb screws that allow you to collimate your laser pointer into perfect registration with the telescope. The increasing popularity of green lasers has made a low cost laser finder possible and the Laser-Mate Universal support allows the widest range of laser pointers to be used. Please note: a green laser pointer is not included in the price - these products are now generally available from a range of astronomy retailers.

Go to top of page

Laser-Mate Universal Laser Pointer finder bracket

Click on the image above
for detail

 

polarsd
1.25” Polarising Star Diagonal
Perfect image brightness control at your fingertips

A quality mirror-based star diagonal with a built-in secret!
Rotating crossed polarising filters are a great way to attenuate image brightness when observing the Moon or other bright targets, and for studying double stars. However, the standard rotating mount filter has some drawbacks in that the eyepiece must be removed each time the observer wishes to make an adjustment. Other solutions have offered an extension barrel with a filter that can be adjusted without removing the eyepiece. However, this solution has the drawback of using up in-focus travel to accommodate the new barrel, and on some instruments this simply does not work.

Our new polarising star diagonal solves these problems. The system comprises a quality machined low-profile mirror-based star-diagonal with a polarising filter fitted to the nosepiece. The second polarising filter is attached to the nosepiece of the chosen eyepiece. To operate the brightness control effect simply rotate the eyepiece while viewing! The brightness control ranges from 1 to 40%.

Contents: 1x 1.25” Star diagonal, 2x 1.25” polarising filters. The polarising filter fitted to the star-diagonal can simply be unscrewed if its removal is required to free the diagonal for general use.

Go to top of page

Click on the image above
for detail

afilter
1.25” MinVB anti-fringing filter
Reduces achromatic halo effects

The MinVB filter is one of the best ways of improving the resolution and contrast of achromatic refracting telescopes. The blue and violet halos commonly seen around bright objects can be a significant problem with popular refractors. Our anti-fringing filter will minimise this effect and introduce the minimum amount of colour bias (yellow). Simply screw the filter to the front of your eyepiece, and the result is better planetary definition (especially noticeable when viewing Jupiter) and generally enhanced contrast and colour definition. Suitable for all achromatic refracting telescopes with 1.25” eyepiece holders. The filter blocks violet and blue light <450nm and passes 95% of all other wavelengths. Supplied in a dust and shockproof case.

Go to top of page

Click on the image above
for detail

No Navigation? - Please Click Here

To fit Model

Description

Stock code

Price (GBP)

All popular eyepieces

Glow-in-the-dark eyepiece label set (70 labels)

AC588

5.99

glow
Glow-in-the-dark eyepiece labels
A comprehensive set of photoluminescent labels to identify your eyepieces in the dark

Our glow-in-the-dark eyepiece label set will emit a soft green glow for hours with just a few moments exposure to white light. Latest technology material stores light with great efficiency and releases it over a period vastly longer than the charge-up time. The set comprises 70 self-adhesive durable plastic labels pre-cut to allow convenient placement on your eyepieces. The sizes cover all popular focal lengths ranging from 3mm to 56mm. The labels are sized 5mm x 19mm and are screen printed in moisture resistant durable black ink.

Go to top of page

Click on the image above
for detail

To fit Model

Description

Stock code

Price (GBP)

Most popular 1.25” eyepieces

Rubber eyecups with side wings (per pair)

AC418

5.99

eyecups
Rubber eyecups (pair) with side wings

These soft rubber eyecups are perfect for daytime viewing, or viewing at night from a light-polluted site. They improve the eyepiece view and comfort greatly, and the side wings or blinkers act as screens to ensure that the minimum amount of extraneous light enters your eye so that you only see the light that has passed through the telescope. They will fit most popular 1.25” Plössl eyepieces. With most eyepieces the existing rubber eyecup should be left in place - simply fit the winged version over the top. Supplied as a pair, they are also the ideal compliment for binocular viewing systems especially when used for solar observing.

Go to top of page

Click on the image above
for detail

To fit Model

Description

Stock code

Price (GBP)

All 1.25” eyepiece holders

1.25” five-position Observer’s Filter Wheel (filters not included)

AC625

89.99

Recommended accessories for use with the AC625 filter wheel

All 1.25” eyepieces and accessories with filter threads

Observers 1.25” deluxe 9-piece neutral density and colour filter set

(ND25, ND13, #11, #12, #15, #21, #23A, #56 and #80A)

AC591

59.99

All 1.25” eyepieces and accessories with filter threads

Magni-Max 1.6x compensating lens (supplementary image amplification lens)

AC555

24.99

To fit Model

Description

Stock code

Price (GBP)

All 1.25” eyepiece holders and cameras

Imager’s Filter Wheel with T-thread fittings
(filters not included)

AC626

129.99

Recommended accessories for use with the AC626 filter wheel

All 1.25” eyepieces and accessories with filter threads

Observers 1.25” deluxe 9-piece neutral density and colour filter set

(ND25, ND13, #11, #12, #15, #21, #23A, #56 and #80A)

AC591

59.99

All 1.25” eyepieces and accessories with filter threads

Magni-Max 1.6x compensating lens (supplementary image amplification lens)

AC555

24.99

Female T-thread and female M42 thread (Pentax)

T-mount male thread to M42 (Pentax) male thread adaptor ring (to connect the AC626 to some Starlight Xpress cameras)

AC628

16.99

To fit Model

Description

Stock code

Price (GBP)

Female T-threads and female M42 threads

Male/male T-thread to M42 (Pentax, Praktica) thread

AC628

16.99

To fit Model

Description

Stock code

Price (GBP)

All 1.25” eyepieces and accessories with filter threads

Observer’s 1.25” deluxe 9-piece neutral-density and colour filter set (ND25, ND13, #11, #12, #15, #21, #23A, #56 and #80A)

AC591

59.99

To fit Model

Description

Stock code

Price (GBP)

All 2” eyepieces and accessories with filter threads

Observer’s 2” deluxe 8-piece neutral-density and colour filter set (ND13, #11, #12, #15, #21, #23A, #56 and #80A)

AC592

89.99

To fit Model

Description

Stock code

Price (GBP)

1.25” eyepiece holders

The Bino-Mate binoviewer

AC549

99.99

Bino-Mate nosepiece

43mm (1.75”) Extension Tube

AC543

15.99

1.25” filter thread on
Bino-Mate

Magni-Max 1.6x compensating lens (supplementary image amplification lens)

AC555

24.99

To fit Model

Description

Stock code

Price (GBP)

All 1.25” eyepiece holders

Classic 27mm Reticule Eyepiece

AC310

34.99

To fit Model

Description

Stock code

Price (GBP)

All 1.25” eyepiece holders

1.25” Polarising Star Diagonal

AC615

39.99

To fit Model

Description

Stock code

Price (GBP)

All 1.25 eyepices and camera nosepieces

1.25” fit variable polarising filter

AC574

29.99

All 2” eyepieces and camera nosepieces

2” fit variable polarising filter

AC583

34.99

To fit Model

Description

Stock code

Price (GBP)

All 1.25 eyepices and camera nosepieces

1.25” fit Neutral density filter in hard shockproof case

AC586

11.99

All 2” eyepieces and camera nosepieces

2” fit Neutral density filter in hard shockproof case

AC584

14.99

To fit Model

Description

Stock code

Price (GBP)

1.25” eyepiece filter threads

1.25” MinVB Anti fringing filter for achromatic refractors

AC571

49.99

To fit Model

Description

Stock code

Price (GBP)

7 to 8.5mm focuser shafts

Max-Refractor replacement focuser knobs

AC575

25.99

To fit Model

Description

Stock code

Price (GBP)

1.25 and 2" eyepieces

Eyepiece and equipment storage case (medium)

AC422

29.99

To fit Model

Description

Stock code

Price (GBP)

1.25” and 2” eyepieces

Soft case for eyepieces and other equipment

AC620

29.99

To fit Model

Description

Stock code

Price (GBP)

Your waist

Eye-Pod action case for eyepieces and equipment

AC619

19.99

To fit Model

Description

Stock code

Price (GBP)

All telescopes

Easy-Aim Red Dot LED Reflex Finder

AC544

24.99

To fit

Description

Stock code

Price (GBP)

Your hand

Red LED GloTorch

AC495

11.99

rings
1.25” and 2” Eyepiece Parfocalising Rings

Parfocalising rings allow you to set the focus register of eyepieces so that they can be swapped rapidly without needing to be refocused. 1.25”and 2” versions are available either as singles or, in the case of the more popular 1.25” version, a set of four. The single-ring kits are supplied with fitting key and spare grub screw. The rings are precision-manufactured from aluminium, and are silver or self-colour finish.

Go to top of page

Click on the image above
for an enlarged view

ac650
NitePhaser-i Dual LED Torch
Probably the worlds smartest microprocessor controlled torch!


Following the success of our original NitePhaser dual LED torch, our new Nitephaser-i has all the features of the original but with a membrane control panel, even lower battery consumption and, best of all, a new lower price! The Nitephaser-i features intelligent design - it has a memory that recalls the function setting when it was switched off, and there is no risk of accidentally switching from red to white light (unlike competing models) and spoiling your dark-adapted vision. The torch has two red and two white super- bright LEDs and is simple and intuitive to use. The torch has a red or white flash mode that can be operated at any brightness setting and can be used as a beacon to identify your equipment during a long exposure imaging session - to prevent yourself and others kicking the tripod and spoiling an exposure. The Nitephaser-i runs on two AA batteries and is supplied with fitted neck lanyard. The smart styling features a comfortable sculptured body with grey rubber hand grips on both sides.

Go to top of page

 

Click on the image above
for an enlarged view

 

To fit Model

Description

Stock code

Price (GBP)

Eyepieces 50mm and under.

Soft Eyeshield small SE1

AC381

19.99

Eyepieces over 50mm diam.

Soft Eyeshield large SE2

AC382

24.99

shields
Soft Eye-shields for Eyepieces
Improves contrast, increases comfort and combats dewing.
 

The Soft Eye-Shield comes in two sizes: SE1 (top, seen here fitted to a Meade Zoom Eyepiece) is for eyepiece barrels of 50mm (2") diameter or less, and SE2 (bottom, here fitted to a 22mm Nagler) is for barrels of greater than 50mm. The SE2 eye cushion is made of padded Terry towelling and can be hand-washed and air-dried. Both seal out light and make very comfortable eye surrounds. They are great for solar observation where extraneous light can spoil the view so easily. An ideal aid to combat light pollution, improves the view by minimising the effects of local environment glare.

Go to top of page

Click on the image above
for an enlarged view

easy
Easy-Aim Red Dot LED Reflex Finder
The easy way to point a telescope
 

Our Easy-Aim red dot finder is an easy to use and precise non-magnifying finder that works with all astronomical telescopes. Even the most seasoned sky-watchers can be caught out by the magnified and inverted or reverted image of a conventional finder. The Easy-Aim allows even the most novice user to point an instrument to targets and alignment stars without the worry of whether you are looking at the right object. Unlike conventional finders, the Easy-Aim works well over a range of viewing distances and can be used with both eyes open! The Easy-Aim superimposes a variable brightness LED red dot on the sky at infinity that can be accurately and easily collimated with the main scope with just two adjuster knobs. The Easy-Aim is supplied with a standard two hole mounting foot and has a built-in quick release dovetail saddle. A universal mounting base is also included (attaching to the telescope tube with double sided sponge tape - included). The universal base allows the Easy-Aim to be attached to all telescopes with tube diameters ranging from 3.5” (90mm) upwards! The finder will fit all Meade ETX and LX telescopes. Depending on viewing distance the FOV is up to 10° - the red dot however, remains constant at 12 arc minutes in diameter regardless of viewing distance. A long life lithium battery and full instructions are included.

Go to top of page

 

Click on the image above
for an enlarged view

hood
Observing hood
Improves your view by eliminating stray light ­ great for day or night observing

We've taken a simple time-honoured way to improve the eyepiece view by darkening the area around the eyepiece and eliminate stray light ­ and improved it. A hole at one end for your head ensures that the hood stays were you need it, and a hem with sewn-in lead weights helps the hood shape itself to the equipment and so more effectively shut out stray light and resist wind-flap. Improves views night and day ­ perfect for solar viewing, especially with Ha filters. Hand-made from quality black gabardine (you could almost wear it as a fashion statement!) the hood measures 94cm x 145cm (37" x 57").

 

Go to top of page

Click on the image above
for an alternative view

phaser
Red LED GloTorch
A red night-vision saving torch that glows in the dark!

The red LED will burn for days continuously on a single set of batteries - but the body of the torch also glows in the dark without batteries. A ten-minute exposure to light is enough to power the GloTorch for 8hours of soft green glow. This great product has been developed by BC&F AE in collaboration with Dual Glo Technology Ltd, another British company, who holds the world patent on the extraordinary "Glo" polymer. Includes neck lanyard and 2xAA batteries.

 

Go to top of page

Click on the image above
for an enlarged view

lowcost
Red LED Night-Vision torch
A low cost red LED night vision saving torch

The "bulls-eye" red LED will burn continuously for days on a single set of AA batteries. The body is bright yellow to help you find it in the dark. Includes neck lanyard and 2xAA batteries

Go to top of page

Click on the image above
for an enlarged view

binomate
The Bino-Mate binoviewer for 1.25” eyepieces


 

The benefits of viewing through the telescope with both eyes would seem to be obvious - yet the complexity and expense of achieving this has meant relatively few observers have actually had the privilege of such a viewing experience. Until now, that is. The Bino-Mate binoviewer combines excellent performance and quality with a groundbreakingly low price. Weighing in at 500g (less than 18ozs without eyepieces) the Bino-Mate binoviewer is probably the world’s lightest binoviewer, and is ideally suited for use with even the smallest telescope.

Ideal for use with the Meade ETX range as well as all SCTs and most refracting telescopes. Two additional accessories are available for the Bino-Mate binoviewer: the Magni-Max 1.6x supplementary compensator lens (AC555) and the AC543 extension tube. The Magni-Max helps achieve focus with Newtonian telescopes and refractors with less than 100mm of focus in-travel (a standard 2x Barlow lens can be used but this is usually more powerful than is needed). The AC543 extension tube lifts the bino-viewer up by 43mm, allowing it to comfortably clear the finder to improve its use with some small telescopes like the Meade ETX range. The Bino-Mate binoviewer will fit the ETX range and work very well as supplied - the binoviewer will be slightly crooked because of the finder (if fitted), but this makes no difference to the performance.

The Bino-Mate binoviewer is supplied with a pair of rubber eyecups (with side blinkers to improve day-time viewing) and comes handsomely packed in a foam-filled attaché case with cutouts for four eyepieces.

Please note that the Bino-Mate binoviewer requires a pair of additional matching 1.25”-fit eyepieces to function - not included.

Technical Specifications of the Bino-Mate binoviewer (AC549)

Clear aperture 17mm
Interpupillary accommodation 52 -75mm
Eyepiece holders Both equipped with individual helical adjustment and screw clamps
In-travel focus adjustment needed 100mm
1.25” nosepiece (fixed) Standard filter thread included
Weight (without eyepieces) 500g (<18ozs)

Go to top of page

 

The optional AC555 compensator lens
Click on the image above
for an enlarged view

The optional AC543
extension tube
Click on the image above
for an enlarged view

crosshair
Classic Reticule Eyepiece
A simple low-cost cross-hair reticule eyepiece - ideal for alignment, collimation, drive training and a host of other uses

The 27mm Kellner design eyepiece has a simple wire cross-hair reticule with independent focussing and a rubber eyecup. Ideal for alignment, motor and drive training with Meade ETX and LX90, LX200 scopes and a host of other uses with all telescopes. Supplied in a protective bolt bottle. NB: this eyepiece is non-illuminated.

Go to top of page

Click on the image above
for an enlarged view

polar
1.25” and 2” Variable Polarising Filter

Our rotating-mount variable polarising filter unit is perfect for controlling brightness when making Lunar or other bright target observations. (Please note: these filters are not suitable for solar observation without an additional solar observation filter). Two identical polarising filters are mounted one above the other - the front filter is mounted in a smoothly rotating ring. By rotating the first filter the light passing through the stacked pair can be modified anywhere between 1 to 40%. The filter is also a very effective way of controlling the image brightness and getting workable exposures when taking webcam or CCD images of bright targets. Black anodised aluminium mounting. The 2” version is ideal for larger eyepieces and 2” camera nosepieces.

Go to top of page

Click on the image above
for an enlarged view

maxr
Max-Refractor replacement focuser knobs
Snazzy to look at - great to use!

Treat the refractor focuser in your life to a makeover with our APO-style replacement focuser knobs. Hand finished in our factory in England, these knobs aren’t just nice to look at - with inlaid rubber grips and chunky 50mm (2”) diameter they improve the feel and performance of your focuser too. Clear anodised finish. Supplied in pairs with fitting screws.

Compatibility
Helios and Skywatcher refractors all models.
Orion (USA) refractors virtually all models
Celestron and Meade 70mm refractors and over (not LXD55)
Celestron reflectors 150mm and larger
Vixen refractors and reflectors (most)

In general the knobs will fit 7 to 8.5mm focuser shafts with flat and taper point ends with a central screw fitting (this would include 95% of the telescopes of far-Eastern manufacture).

Go to top of page

Click on the image above
for an enlarged view

case
Eyepiece and equipment case
(Medium)

A lightweight moisture and dust resistant moulded case with pre-cut foam interior. The case has die-cut foam to allow for varied eyepiece and equipment combinations. Split handle ensures that equipment cannot fall out when case is being carried. Foam will hold 18 x 1.25" eyepieces plus other equipment or 12 x 1.25" and 8 x 2" eyepieces plus other equipment, and many mixed combinations in-between.

Go to top of page

Click on the image above
for an enlarged view

polar
1.25” and 2” Neutral density filter

Our 15% neutral density filters are perfect for reducing brightness when making Lunar or other bright target observations. Although single density ND filters have less convenience than our variable polarising filters (see AC574 and AC583) there is less risk of reflections (and they are significantly less expensive!). Our ND filters are ideal for double star observations where attenuating the brightness of a bright star will allow you to see a companion more easily. (Please note: these filters, although useful to tune image brightness when making solar observations, are not suitable for solar observation without an additional solar observation filter). Black anodised aluminium mounting supplied in a shockproof hard case.

Go to top of page

 

Click on the image above
for an enlarged view

To fit Model

Description

Stock code

Price (GBP)

All telescopes

Universal Solar Finder

AC618

19.99

To fit Model

Description

Stock code

Price (GBP)

ALL 1.25" eyepiece barrels

Parfocalising Ring
(single ring and key)

AC576 1.25"

4.99

ALL 2" eyepiece barrels

Parfocalising Ring
(single ring and key)

AC573 2"

5.49

ALL 1.25" eyepiece barrels

Parfocalising Rings
(set of 4 rings and key)

AC385 1.25"

15.99

To fit

Description

Stock code

Price (GBP)

Most peoples heads!

Blackout observing hood

AC470

19.99

To fit

Description

Stock code

Price (GBP)

Your hand

Red LED Night-Vision torch

AC469

9.99

To fit

Description

Stock code

Price (GBP)

You

Nitephaser-i intelligent dual LED torch

AC650

39.99

bulkhead
Bulkhead Eyepiece Shelf
For Dobsonians and observatory walls

A simple and durable steel shelf for screwing to the side of your Dobbo rocker box or the wall of an observatory. Holds two 2" and three 1.25" eyepieces. Size: 290mm x 70mm

Go to top of page

Click on the image above
for detail

To fit Model

Description

Stock code

Price (GBP)

Dobbos
and Obbos

Bulkhead Eyepiece Shelf

AC386

15.99

alerts
Red Alerts
A blinking good idea to avoid trips and bumps in the night!

A set of three flashing red LED marker lights to pick out tripod legs and other equipment in the dark. Lo-brightness LEDs flash about twice per second. With no moving parts they just snap onto a battery and begin flashing. They run for days ­ typically 1 to 2 weeks continuous use). Reverse polarity protected. Ideal for astro-photographers ­ no more tears over lost exposures caused by bumping into scope. Includes 3x 9V pp3 batteries and 3x special Velcro battery cases.

Go to top of page

Click on the image above
for detail

To fit Model

Description

Stock code

Price (GBP)

Everything

Red Alert LED markers

AC413

21.99

googles
Nite-Saver red goggles
Save your night vision with these simple red lens goggles

It’s a perfect night ­ you’ve been out under dark skies for a couple of hours or so, the views are superb and getting better, but you need go indoors and find that vital accessory. Say goodbye to your dark-adapted vision ­ just a glimpse of white light and it’s gone and may take another 40 minutes or so to build up again. With our simple but specially-made ruby-red goggles you can go inside (in moderate white light), find accessories and make a cup of tea, all without losing your dark-adapted vision. Try putting them on 25 minutes before starting an observing session, and get the benefits of dark adaption the moment you step outside and remove the goggles. One size fits all.

Please note that these goggles must not to be used as eye protection in hazardous operations, but only as indicated.

Go to top of page

Click on the image above
for detail

To fit Model

Description

Stock code

Price (GBP)

Your face

Nite-saver red goggles

AC534

19.99

chair
Observing chair
At last, a really comfortable high back observing seat with wide-range height adjustment

The observing seat adjusts quickly from 51cm to 84cm (20” to 33”) and has a thick padded seat and an adjustable padded backrest. Foot rests and extra wide feet make the Observing seat feel safe and secure even at its maximum height. The tubular feet will not sink into soft ground when used in the field. Legs fold back to save storage space in small observatories. Manufactured in steel and finished in satin black paint for years of service.

Go to top of page

Click on the image above
for detail

To fit Model

Description

Stock code

Price (GBP)

All astronomers

Observing chair

AC532

79.99

addon
Universal Solar Finder
A safe and accurate solar finder that easily attaches (permanent or temporary) to all telescopes large or small
Anyone who has used a solar observation filter or made observations by the eyepiece projection method knows the frustrations of accurately pointing an instrument at the sun. This cleverly designed finder has two collimatable targets: one permanently fixed, and the other magnetic and repositionable. The finder has a universal mounting platform (identical to the one supplied with the Easy-Aim Red dot finder AC544) with self-adhesive strips for permanent attachment. The kit is also supplied with a Velcro strap for quick temporary fitting to a wide range of instruments. Though compact enough for the smallest scopes, it is precise enough to point even long focal length telescopes accurately. Perfect for use with all Coronado MaxScopes.

Go to top of page

Click on the image above
for an enlarged view

softcase
Eyepiece and Equipment Soft case
A tough case to protect and transport your telescope accessories and equipment
 

Made from tough Magnaweave nylon with foam padded reinforced sides and base, the inside measures L375mm x W170mm x D200mm. A removable die-cut foam filler block offers versatile storage for up to fourteen 1.25” eyepieces or six 1.25”, six 2” eyepieces and a 2” star diagonal, and many mixed combinations in-between. The case has an optional anti-dew flap so that the case can be left open without dewing. Comes supplied with a handy red night-vision saving LED key-ring torch that can be attached to the case to help you identify equipment in the dark.

Features include: detachable shoulder strap, large zippered front pouch, twin zips on lid with carrying handle and anti-dust flap, zippered netting pouch in lid for filter and other small accessory storage.

 

Go to top of page

 

Click on the image above
for an enlarged view

Red LED torch included

eyepod
The Eye-Pod - Waist-fitting eyepiece action case
Keeps your favourite eyepieces and filters conveniently and safely to hand
while observing.
 

Made from genuine leather the Eye-Pod is as stylish-looking as it is functional. Its pre-cut foam interior has been designed to hold just enough equipment for use at the telescope while observing. Keeps your favourite eyepieces safe, dew-free and conveniently to hand at your waist. Comes supplied with a handy red night-vision saving LED key-ring torch that can be attached to help you identify equipment in the dark. Features include: fully adjustable, broad and comfortable waist-belt, zippered front and rear pouch with two additional side pouches for filters and other small accessories. Versatile pre-cut foam interior to hold three 1.25” and 2” eyepieces.

Go to top of page

 

Click on the image above
for an enlarged view

Red LED torch included

AC625
The Observer’s Filter Wheel
The expert observer’s way to change filters with any 1.25” eyepiece

The Observers filter wheel has a five-position caddy that allows five separate 1.25” filters to be threaded into position and rotated in front of a fitted eyepiece for rapid selection. See planetary detail pop into view with the best filter thanks to fuss-free filter selection at the flick of a finger. Vary the magnification with a quick eyepiece change - no need to fiddle with filters in the dark! Perfect for planetary and lunar observers. The selection of filters in the wheel can be changed at the telescope in seconds without disassembling of the filter wheel casing.

Here are just some of the great features of the Observer’s Filter Wheel:

• Ultra-thin 20mm body thickness.
Works with Meade (ETX, LX90, LX200) and Celestron Maks and SCTs.

• All five filter positions fully threaded to accept standard 1.25” filters

• 1.25” nosepiece (chromed brass) also threaded for filters
(and AC555 Magni-Max use)

• Tactile click-stop for each filter position.

• 95% aluminium construction. CNC manufactured in the UK to the highest standards

• Filters all fully enclosed - supplied with anti-dewing cover.

• Light-weight construction: less than 280grams (with four typical filters fitted).

Filter wheel and other critical components black anodized finish, main casing and filter cover finished in black resin powder coating.

Please note: this product is supplied without filters.

Go to top of page

 

 

The Observer's Filter Wheel

The Observer's Filter Wheel
Click on the image above
for an enlarged view

Easy filter loading

Easy filter loading
Click on the image above
for an enlarged view

AC591
Observer’s 1.25” filter set
A deluxe 9-piece neutral-density and colour filter set

The Observers 1.25” deluxe filter set has a carefully selected range of filters that will help you to make the best observations with all telescopes. The set contains a total of nine filters made up of two neutral-density filters: one ND13 allowing 13% transmission and one ND25 allowing 25% transmission - ideal for reducing image brightness when observing the moon and other bright targets - and seven colour filters: #11, #12, #15, #21, 23A, #56, and #80A, ideal for enhancing contrast and showing faint planetary detail. The filter set is supplied in a hard case with die-cut foam filling - no need for fussing with separate cases in the dark.

 

Go to top of page

 

 

The Observer's Filter Wheel

Click on the image above
for an enlarged view

AC592
Observer’s 2” filter set
A deluxe 8-piece neutral-density and colour filter set

The Observers 2” deluxe filter set has a carefully selected range of filters that will help you to make the best observations with all telescopes. The set contains a total of eight filters made up of one neutral-density filter: ND13 allowing 13% transmission - ideal for reducing image brightness when observing the moon and other bright targets - and seven colour filters: #11, #12, #15, #21, 23A, #56, and #80A, ideal for enhancing contrast and showing faint planetary detail. The filter set is supplied in a two hard cases with die-cut foam filling - no need for fussing with small separate cases in the dark.

 

Go to top of page

 

Observer’s 2” filter set

Click on the image above
for an enlarged view

AC626
The Imager’s Filter Wheel
The expert imager's and observer’s way to change filters with any camera or 1.25” eyepiece

The Imager’s filter wheel is very similar to our Observers Filter Wheel AC625 above but it has additional features designed to suit the needs of astro imagers. It has the same five-position caddy that allows five separate 1.25” filters to be threaded into position and rotated in front of a fitted eyepiece or camera for rapid selection. The selection of filters in the wheel can be changed at the telescope in seconds without disassembly of the filter wheel casing. But the Imager’s Filter Wheel has fully removable T-threaded 1.25” eyepiece holder and 1.25” nosepiece. The imager’s Filter Wheel has a more robust aluminium body to support even the heaviest CCD camera without distortion. A male/male T-thread adaptor ring is included to allow attachment of the filter wheel to female T-threaded cameras (Starlight Xpress, SBIG CCD etc). An additional ring is available to allow connection of the filter wheel to cameras with a Pentax/Praktika M42 female thread (e.g.some Starlight Xpress cameras).

Here are just some of the great features of the Imager’s Filter Wheel:

• Fully removable T-threaded 1.25” eyepiece holder and 1.25” nosepiece

• Slim 23mm body thickness. Works with Meade (ETX, LX90, LX200) and Celestron Maks and SCTs.

• All five filter positions fully threaded to accept standard 1.25” filters

• 1.25” nosepiece also threaded for filters (and AC555 Magni-Max use)

• T-thread adaptor ring for camera connection included

• Tactile click-stop for each filter position

• 95% aluminium construction, CNC-manufactured in the UK to the highest standards

• Filters all enclosed - supplied with anti-dewing cover

• Light-weight construction: less than 300grams (with four typical filters fitted).

Filter wheel and other critical components black anodized finish, main casing and filter cover finished in black resin powder coating.

Please note: this product is supplied without filters.

Go to top of page

 

 

The Imager's Filter Wheel and components

The Imager's Filter Wheel and components
Click on the image above
for an enlarged view

The filter wheel with eyepiece holder and nosepiece in position

The filter wheel with eyepiece holder and nosepiece in position
Click on the image above
for an enlarged view

AC628
Male T-thread to male M42 thread
A male/male adaptor to a fit our filter wheels on to some CCD cameras

This adaptor ring has a male thread at both ends: one end is standard T-thread